Contact Us
WD-GS-24S8C4Xi

WD-GS-24S8C4Xi SWITCH

The WD-GS-24S8C4Xi switch is a 10G uplink L3 managed industrial Ethernet fiber switch . It has 24* 100/ 1000Base-X SFP ports and 8* 10/ 100/ 1000Base-T RJ45 combo ports and 4* 1/ 10G SFP+ fiber slot ports. Each port can support wire-speed forwarding.

ap-900
Product Highlights

WD-GS-24S8C4Xi

  • 36-Port 10G Uplink L3 Managed Industrial Ethernet Switch
  • 4-Port 1/10G SFP+
  • 24-Port 100/1000Base-X SFP
  • 8-Port 10/100/1000Base-T RJ45 Combo Line

Key Features

Gigabit access, 10G uplink
  • Supports non-blocking, wire-speed forwarding.
  • Supports full-duplex operation based on IEEE 802.3x and half-duplex operation based on Backpressure.
  • Supports a combination of Gigabit Ethernet ports and 10G SFP+ uplink ports, enabling flexible network deployment to meet various application scenarios.
Security
  • Supports port isolation.
  • Supports port-based broadcast storm suppression.
  • Supports flexible IP, MAC, port, and VLAN quadruple binding.
  • Supports IEEE 802.1X authentication for LAN computers and controls the authorization status of controlled ports based on authentication results.
Strong business processing capability.
  • Supports ERPS ring network and STP/RSTP/MSTP protocols to eliminate Layer 2 loops and provide link redundancy.
  • Supports IEEE 802.1Q VLAN, allowing flexible configuration of VLAN, Voice VLAN, and QinQ according to network requirements.
  • Supports static and dynamic link aggregation to increase link bandwidth and improve network performance.
load balancing, link backup, and improve link reliability.
  • Supports QoS with three priority modes: port-based, IEEE 802.1p-based, and DSCP-based, along with four queue scheduling algorithms: Equ, SP, WRR, and SP+WRR.
  • Supports ACL for filtering data packets through configurable matching rules, processing actions, and time-based permissions, providing flexible security access control policies.
  • Supports IGMP V1/V2/V3 multicast protocols and IGMP Snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing applications.
Stable and reliable
  • CCC, CE, FCC, RoHS.
  • Low power consumption, No fan, aluminum shell.
  • The user-friendly panel can show the device status through the LED indicator of PWR,Link.
  • Self-developed power supply, high redundancy design, providing a long term and stable power output.
Software

SOFTWARE SPECIFICATIONS

L3 Function
  • Support L3 network management function
  • Supports IPV4 dynamic routing RIPv1/v2,OSPFv2
  • Supports IPV4/IPV6 static routing/default routing, each supporting a maximum of 128 entries
  • Supports three-layer routing forwarding, supports communication between different network segments and VLANs
Port configuration
  • Auto-negotiation
  • Traffic statistics
  • Port Mirror: TX/RX/BOTH; Many- to-1 monitor
  • Flow Control
Link Aggregation
  • Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP
  • LACP
  • Static link aggregation
MAC Table
  • Dynamic MAC address management
  • Static MAC address
  • Aging Time
VLAN
  • 4094 Active VLANs
  • 802.1Q Tag VLAN
  • Port VLAN
  • Protocol VLAN
  • MAC VLAN
  • Voice VLAN
  • 802.1ad Q-in-Q tunneling Private VLAN (Protected port)
  • GARP/GVRP
  • 4094 VID
ACL
  • 256ACLs
  • L2, L3 e L4
  • Time-based ACL
Security
  • 802.1D Spanning Tree Protocol (STP)
  • 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple
  • Filter
  • Spanning Tree Protocol (MSTP) Loop Guard
  • Root Guard
  • TC-BPDU Guard
  • BPDU Guard BPDU Filter
Ring Protection
  • <20ms G.8032 ERPS Ring
      Multicast
      • IGMP v1/v2/v3 Snooping, Fast Leave
      • 256 groups
      • MLD Snooping
      • Multicast VLAN
      QOS
      • Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port
      • CoS 802.1p-based CoS
      • DSCP-based
      • port-based
      • Scheduling algorithms SP, WRR, SP+WRR
      DHCP
      • CLI (Telnet, Console, SSHv1/v2) Firmware
      • upgrade via console/web/TFTP Configuration
      • SNMP v1/v2c/v3 with Full Private MIBs RMON 4
      • groups
      • WEB (HTTP/HTTPS)
      • Backup/Reload
      • Dual Firmware
      • LLDP
      Security Features
      • Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type;
      • Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection
      • Port Security MAC address filter
      • ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection
      • 802.1x Authentication (port-based e MAC-based)
      • TACACS/TACACS+ Authentication
      • RADIUS Authentication
      • DHCP Filter
      • Guest VLAN
      • SSLv2/SSLv3/TLSv1
      • SSHv1/SSHv2
      • DoS (Denial of Service)
      Security Features
      • Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type;
      • Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection
      • Port Security MAC
      • address filter
      • ARP Association (Manual, ARP scanning, DHCP snooping) ARP
      • Protection
      • 802.1x Authentication (port- based e MAC-based)
      • TACACS/TACACS+ Authentication
      • RADIUS Authentication
      • DHCP Filter
      • Guest VLAN
      • SSLv2/SSLv3/TLSv1
      • SSHv1/SSHv2
      • DoS (Denial of Service)
      Other Features
      • DNS Client DHCP
      • Relay DHCP Client
      • DHCP Snooping
      • DHCP Option 82
      • SNTP Client
      • UDLD
      Maintenance
      • Cable Diagnostics
      • Memory and CPU Monitoring
      • System log (Local and Remote)
      • Ping
      • SFP DDM(Digital Diagnostics Monitoring) Thermal protection
      Hardware

      Hardware Specifications

      Model ZX-HY4T2408S-SFP
      Fixed Port 4* 1/ 10G uplink SFP+ ports
      24* 100/ 1000Base-X SFP ports
      8* 10/ 100/ 1000Base-T RJ45 combo ports
      1*Console port
      Ethernet Port Port 1-24 support 10/ 100/ 1000Base-T(X) auto-sensing, full/half duplex
      MDI/MDI-X self-adaption
      Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP (≤100 meters)
      100BASE-TX: Cat5 or later UTP (≤100 meters)
      1000BASE-T: Cat5e or later UTP (≤100 meters)
      Optical Fiber Port 1/10G SFP+ optical fiber port, default no includes optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
      Optical Fiber Port Expansion Support Turbo overclocking 2.5G optical module expansion and ring network
      Optical Cable/ Distance Multi-mode:850nm /0~300M(10G) ,850nm /0~500M (1.25G);
      Single-mode:1310nm/ 0~40KM,1550nm/ 0~120KM.
      Network Management Type L3
      Ring network Supports ERPS ring network function, with a maximum number of rings of 5 and a convergence time of<20ms
      Forwarding Mode Store and Forward (Full Wire Speed)
      Switching Capacity 128Gbps
      Buffer Memory 96Mpps
      MAC 32K
      LED Indicator Power Indicator Light P：1 Green
      Fibre Indicator Light F：1 Green (Link, SDFED)
      On the RJ45 seat Yellow: Indicate PoE
      Green: Indicates network working status
      Reset Switch Yes, Press and hold the reset switch for 5s and release it to restore the factory settings
      Voltage DC36-72V, 4 Pin industrial phoenix terminal, support anti-reverse protection
      Power Supply AC100-240V 50/60Hz industrial power supply
      Dimension (L*W*H) 440mm* 300mm*44mm
      Operation Temperature -40~+80°C,
      Storage Temperature -40~+85°C
      Operation Humidity 5%~90% RH Non-condensing
      Storage Humidity 5%~95% RH Non-condensing
      Installation Desktop, 19-inch 1U cabinet installation